Can You Scratch With Any Turntable?

Can you scratch on a direct drive turntable?

A direct-drive turntable eliminates belts, and instead employs a motor to directly drive a platter on which a vinyl record rests.

This makes scratching possible, as the motor would continue to spin at the correct RPM even if the DJ wiggles the record back and forth on the platter..

Is scratching easier on turntables?

Belt-drive or Direct-drive turntable for scratching? Since, scratching involves lot of backspinning, the old days’ belt-drive turntables are unsuitable for the activity. As they have a slow startup time, scratching causes wear and tear and subsequent breakage of the belt in belt-drive turntables.

Are Technics turntables good?

The Technics SL-1200 MK2 is unquestionably not the best turntable ever made. For great audio quality, you’ll want a belt-driven audiophile deck. … Most critically, the 1200 was direct-drive, one of the hallmarks of the Technics brand for years prior.

Can you DJ with a belt drive turntable?

Belt Drive Made of rubber, the belt helps to isolate the motor from the platter, creating less motor noise issues such as vibration. For this reason, most audiophile turntables are belt driven. … It is possible to DJ on a belt drive turntable but you’re going to have a hard time getting timings right.

Do you need a special turntable for scratching?

For most DJs, this means you need to get a pair of direct-drive turntables, a mixer, and collection of vinyl records to practice sampling and scratching. … As long as you’ve got a direct-drive model, it should be fine for scratching.

What is needed to scratch records?

Equipment You Need for ScratchingAt least 1 turntable, 2 is the norm (direct drive with high torque if possible)Mixer (the crossfader needs a sharp cut in and preferably curve adjustment)Slipmats (I use butter rugs)Needles / cartridges (Try Shure m447 for a good scratch needle)Scratch vinyl e.g “Superseal”Amp + speakers / powered monitor speakers.Mar 12, 2011

Are Pioneer DJ turntables good?

Although Technics dominate the DJ turntable market, Pioneer DJ are the standard when it comes to CDJs, so it’s a brand name with a lot of clout when it comes to DJ gear. … While the motor doesn’t have quite as much power as its higher-priced sibling, it should be enough to suit all but the most serious scratch DJs.

What is it called when a DJ scratches a record?

Scratching, sometimes referred to as scrubbing, is a DJ and turntablist technique of moving a vinyl record back and forth on a turntable to produce percussive or rhythmic sounds. A crossfader on a DJ mixer may be used to fade between two records simultaneously.

Who is the best scratch DJ?

DJ Jazzy JeffYes, DJ Jazzy Jeff is one of the best DJs who can scratch a record to ever hit the scene. He’s performed throughout the world, has some of the fastest hands in the industry, and thoroughly knows how to channel the grit, energy, and love of hip hop’s roots into every set he spins.

Do I need a preamp for my turntable?

Some turntables have a preamp built-in. … If your turntable has a USB output, it has a built-in preamp. If you do need an external preamp, you will need a set of cables (usually RCA cables) to connect to your audio system. Preamps have a wide range when it comes to build and sound quality.

Can you fix scratched vinyl records?

While there is no foolproof way to repair scratches on vinyl, you can try using wood glue to remove dust and even out the surface of your record. Clean your record with a dry brush, liquid cleaning solution, or a toothpick to remove additional dirt and debris.

Do you need 2 turntables to scratch?

1 turntable is fine for scratching unless you plan on doing scratching, blending and other stuff that requires 2 tt’s.

Can you DJ with any turntable?

You can technically use any turntable. However, professional DJs tend to use high-end turntables with direct drive motors and quality components. A direct-drive motor is considered an essential feature for DJs.

How long do turntable belts last?

3 to 5 yearsIf you use your turntable almost every day for at least a couple of hours, then you are much more likely to need to change your belt more often. A typical turntable belt can last anywhere from 3 to 5 years or even longer.

What turntable should I buy for scratching?

The 5 Best Turntables for ScratchingTechnics SL-1210. Editor’s Choice – Pro Turntable For Any Serious DJ. … Numark PT01 Scratch Portable DJ Turntable. Affordable Option – Great Portable Affordable Turntable. … Stanton STR8.150 MKII. Mid-Range Professional Turntable. … Audio-Technica AT-LP1240. … Pioneer DJ PLX-500 Direct Drive Turntable.Mar 10, 2021

Is scratching bad for records?

It’s almost impossible to avoid damaging records while scratching. … The oils from your skin can further degrade the sound quality of the record. So, make sure you wash your hands before DJing with a record to help reduce the risk of oils from your skin getting onto your vinyl.

What is better belt drive or direct drive turntable?

While belt drive turntables are incredibly popular, they have a lower torque than direct drive turntables. While torque isn’t necessarily a critical quality, it can be a deal-breaker for some. Belt drive turntables also have a slightly less accurate playback speed than direct drive turntables.

Is it OK to touch a vinyl record?

How do you handle a vinyl record? Never touch the record’s playing surface with your bare hands or fingers as your body oil will transfer onto the record attracting even more dust thereby affecting sound quality. Always hold a record by its outer edges only.

Do you need two turntables?

Because I believe in the benefits of vinyl from both an audible and an aesthetic viewpoint, it is highly beneficial to have two different playback systems: 1) a high-quality turntable that sounds great, and 2) a secondary, cheaper record player that you can use for ‘well loved’ or damaged records.

Can you DJ vinyl with two different turntables?

Yes it will work fine assuming its all connected up right. I think a lot of djs will agree that although learning on vinyl is the hardest way nowadays it will ultimately make you better at beatmatching.

Add a comment